Femto ARTEMIS RTD Sensor
Femto Scientific

Femto ARTEMIS RTD Sensor

SKU: ART-SEN-RTD
$500.00
Wireless RTD temperature monitoring point with remote Pt100 probe — add another calibrated monitoring point to the same ARTEMIS deployment.

A configurable wireless RTD monitoring point for refrigerators, freezers, chambers, incubators, storage, and other temperature-critical assets. RTD transmitter with onboard signal conditioning and remote Pt100 probe, reporting over the encrypted long-range ARTEMIS mesh. Part of the Femto ARTEMIS Platform Powered By ARTEMIS EDGE AI.

  • Remote Pt100 RTD probe (2-wire, 4-wire, and Pt1000 configurations by quotation)
  • Femto configured range −40 to +120 °C, dependent on probe, cable, fitting, and buffer
  • Battery or supported external DC power configuration
  • Optional glycol or bead thermal-buffer bottle
  • One calibration point included when selected in a Starter Pack

Specifications

Platform Femto ARTEMIS Platform Powered By ARTEMIS EDGE AI
Sensor Radio 900 MHz DigiMesh, acknowledged packets, up to 2-mile line of sight
Enclosure IP65; wall or magnet mount
Measurement Temperature via remote RTD probe with onboard signal conditioning
Probe / Input 100-ohm 3-wire Pt100 standard; custom 2-wire, 4-wire, and Pt1000 configurations by quotation
Configured Range −40 to +120 °C (−40 to +248 °F), dependent on probe, cable, fitting, and buffer
Accuracy ±0.5 °C full scale before application-specific calibration; configured-system performance up to ±0.2 °C at defined validated calibration points when specified and supported by the delivered system
Resolution 15-bit ADC; nominal 0.03125 °C resolution with default Pt100 configuration
Batteries Four AA lithium batteries; optional external DC configuration
Battery Endurance Up to 500,000 transmissions; approximately one year at the standard deployment configuration unless otherwise validated
Reported Data Temperature, battery voltage/percentage, sensor type, node/device ID, radio address, counter, timestamp, gateway ID
Encryption 128-bit AES at the sensor radio layer
Included Calibration One temperature point when selected in a Starter Pack
Additional Calibration Point $70 per sensor, per additional temperature point; at least three points recommended for critical refrigerators/freezers
Application Refrigerators, freezers, chambers, incubators, storage, and other temperature-critical assets