Femto ARTEMIS Equipment Surface Temperature Sensor
Femto Scientific
Femto ARTEMIS Equipment Surface Temperature Sensor
SKU: ART-SEN-SURFACE-T
$500.00
Battery-powered wireless equipment-surface temperature monitoring point for motors, pumps, compressors, and HVAC — add cable-free surface-temperature trending to the same ARTEMIS deployment.
Battery-powered wireless temperature trending for equipment housings and mounting points — motors, pumps, compressors, fans, blowers, chillers, gearboxes, and HVAC. The temperature sensor is integrated into the device mounting base and reports over the encrypted long-range ARTEMIS mesh. Part of the Femto ARTEMIS Platform Powered By ARTEMIS EDGE AI.
- Integrated equipment-surface temperature channel (temperature-only configuration)
- Magnetic or 1/4-28 UNF threaded mounting; IP67 sealed enclosure
- Special hybrid D-cell and supercapacitor battery — up to approximately 10 years at one transmission per day
- Compatible with the Enterprise Gateway and Enterprise Gateway Plus
- One calibration point included when selected in a Starter Pack
The reading is the sensor base and mounting-point temperature; it is not an immersed process measurement or a direct internal-bearing temperature.
Specifications
| Platform | Femto ARTEMIS Platform Powered By ARTEMIS EDGE AI |
| Sensor Radio | 900 MHz DigiMesh (902–928 MHz), up to 24 dBm, 200 kbps; compatible with the Enterprise Gateway and Enterprise Gateway Plus |
| Wireless Range | Up to 2 miles line of sight; approximately 1,000 ft in dense environments |
| Enclosure | IP67 sealed enclosure |
| Dimensions / Mass | 85 mm high × 48 mm base diameter; approximately 225 g |
| Mounting | 1/4-28 UNF thread and magnetic mount |
| Measurement | Integrated equipment-surface temperature only (temperature-only configuration) |
| Configured Range | Component rating −40 to +70 °C; OEM-tested range 0 to +40 °C |
| Accuracy | ±1 °C nominal; equipment-surface trending — not an immersed process or internal-bearing measurement |
| Batteries | Special non-rechargeable hybrid D-cell plus supercapacitor; 16,000 mAh nominal |
| Battery Endurance | Up to approximately 10 years at 1 transmission/day; 8 years at 12/day; 5 years at 24/day; interval and environment dependent |
| Reported Data | Surface temperature, battery, device identity, counter, timestamp, and gateway identity |
| Encryption | 128-bit AES at the sensor radio layer |
| Included Calibration | One temperature point when selected in a Starter Pack |
| Additional Calibration Point | $70 per sensor, per additional temperature point |
| Application | Motor, pump, compressor, fan, blower, chiller, gearbox, and HVAC surface-temperature trends and overtemperature alerts |
| Compatibility | Excludes glycol/bead bottles and DC power supply; measures mounting-base surface temperature only |