Build Your Femto ARTEMIS Platform
Femto ARTEMIS Platform Powered By ARTEMIS EDGE AI — configure gateways, sensors, accessories, and accredited calibration points as one deployment.
1 Choose your starting point
2 Select the included sensor
Any sensor may be selected at the same package price. One calibration point for the selected sensor is part of the pack.
3 Add sensors
RTD, temperature/humidity, and equipment surface temperature sensors may be combined within the same ARTEMIS deployment — add any quantity required by the laboratory.
Add another calibrated temperature monitoring point to the same ARTEMIS deployment.
Add ambient temperature and relative-humidity monitoring to another room or location.
Add cable-free equipment-surface temperature trending for a motor, pump, compressor, chiller, gearbox, or HVAC unit.
4 Sensor accessories
Thermal-buffer guidance: glycol or bead for 2–8 °C refrigerators; validated bead media for −20 °C freezers; no bottle for ambient room monitoring.
Add liquid thermal mass for validated RTD temperature applications.
Add non-spill thermal mass for RTD temperature applications.
Add external DC power for a supported RTD sensor configuration.
5 Calibration points
Calibration is performed under the applicable Femto ISO/IEC 17025 scope when quantity, range, method, and location are covered. One calibration point for the included sensor is already part of the pack. A one-point service verifies performance at one point only — at least three points are recommended for critical refrigerators and freezers.
Add one temperature calibration point to one RTD or surface temperature sensor.
Add one combined temperature/humidity calibration point to one T/H sensor. Applies to temperature/humidity sensors.
6 Backup power
UPS runtime is calculated and load-tested with the actual gateway, modem, and network equipment at deployment.
Standard gateway backup-power option.
Higher-capacity enterprise backup-power option for cellular loads or additional protected equipment.