Femto Scientific provides ISO/IEC 17025 accredited CO2 incubator calibration that keeps clinical and diagnostic laboratories CAP- and CLIA-ready — NIST-traceable certificates with as-found and as-left data and documented uncertainty for the incubators behind your clinical microbiology, IVF and ART, and cytogenetics culture work.
- Calibrated temperature, CO2 & humidity for survey
- NIST-traceable reference gas & thermometry
- As-found & as-left data on every certificate
- Documented measurement uncertainty (k=2)
- Survey- and inspection-ready documentation
- Onsite service for high-volume labs
- Semi-annual intervals for IVF & embryology
- Automatic recertification scheduling
CO2 incubator records your CAP inspector can check off without a second question.
CO2 Incubator Calibration Requirements for CAP and CLIA Laboratories
Clinical laboratories accredited by the College of American Pathologists (CAP) or operating under CLIA must calibrate incubators with NIST-traceable standards and keep the records available for survey. ISO/IEC 17025 accredited calibration is the cleanest way to demonstrate that competency for every clinical microbiology, IVF, ART, and cytogenetics incubator on your floor.
CAP Survey Readiness
CAP checklists require documented temperature and CO2 verification records with NIST traceability for incubators used in clinical testing. Our certificates document NIST-traceable calibration, the calibration date, as-found/as-left results, and reported uncertainty, exactly what surveyors expect.
CLIA 42 CFR Part 493
CLIA requires instruments to be maintained and calibrated per manufacturer and quality-standard specifications, using NIST-traceable references within the established interval. Our accredited certificates meet those requirements and integrate with your LIMS.
IVF, ART & Cytogenetics
Embryo and specialized cell culture are extremely sensitive to CO2 and temperature deviation. Accredited calibration with documented uncertainty and as-found data gives you the evidence to demonstrate condition validity — and to scope any impact if an incubator is found out of tolerance. Many IVF programs calibrate semi-annually.
A Full Calibration, Not Just a Single-Point Check
A daily display reading confirms one point; it is not a calibration. Accredited calibration characterizes temperature uniformity and CO2 concentration across the chamber with NIST-traceable references and documents it for CAP and CLIA compliance. Both belong in your quality program.
- Multi-point temperature mapping across the chamber
- CO2 concentration verification with a reference gas analyzer
- As-found & as-left data with adjustment
- Documented expanded uncertainty (k=2)
- Barcode calibration stickers for asset tracking
- Electronic certificates for paperless QMS
Most CAP and CLIA laboratories calibrate incubators at least annually; IVF and embryology programs are strongly recommended to calibrate semi-annually. Compare service levels and turnaround on the CO2 incubator calibration service page, or add continuous ARTEMIS remote monitoring for your incubators and cold storage.
CAP & CLIA CO2 Incubator Calibration FAQs
Yes. CAP laboratory accreditation checklists explicitly require that incubators used in clinical laboratory testing have documented temperature and CO2 verification records with NIST traceability. CAP inspectors evaluate calibration records as part of equipment qualification documentation during laboratory surveys. ISO/IEC 17025 accredited calibration certificates from Femto Scientific satisfy CAP inspection requirements directly, because they include all required elements: as-found and as-left data, NIST traceability documentation, documented measurement uncertainty, and the accreditation scope identifier.
Yes. Under 42 CFR Part 493 (CLIA regulations), all laboratory equipment used in clinical testing must be maintained and calibrated according to manufacturer instructions and quality system requirements. For CO2 incubators used in cell-based clinical testing, culture preparations, or clinical microbiology, CLIA requires documented calibration records that demonstrate the instrument was operating within specification at the time samples were processed. Femto Scientific’s ISO/IEC 17025 accredited calibration certificates satisfy CLIA documentation requirements and are formatted for integration with laboratory quality management systems.
Pharmaceutical and cGMP laboratories should calibrate CO2 incubators every 6 months; CAP- and CLIA-regulated clinical laboratories should calibrate at least annually; IVF and embryology programs should calibrate semi-annually; general cell culture and biotechnology research laboratories should calibrate annually. Additional calibration runs are required after significant repairs, CO2 sensor replacement, HEPA filter replacement, relocation, or any change control event. Femto Scientific can help you establish and document a calibration interval appropriate for your specific compliance program.
We calibrate all types of laboratory incubators: CO2 incubators (water-jacketed and air-jacketed), microbiological incubators, refrigerated incubators, shaking/orbital incubators, environmental chambers, stability chambers, IVF and embryology incubators, and tri-gas incubators (CO2, O2, N2). For each incubator type, calibration parameters are tailored to the instrument’s intended use — temperature mapping for all types, CO2 verification for CO2 and tri-gas models, O2 verification for tri-gas and hypoxia incubators, humidity verification for CO2 and environmental chambers.
Yes. Femto Scientific provides onsite CO2 incubator calibration at customer facilities across major U.S. laboratory markets. Onsite calibration eliminates shipping risk, reduces instrument downtime, and allows multiple incubators to be calibrated in a single visit. Our field service teams bring NIST-traceable reference gas analyzers, multi-point temperature probes, and reference hygrometers to your facility, and electronic ISO/IEC 17025 accredited certificates are delivered after the service. Off-hours scheduling is available to minimize disruption to active cell culture programs. Contact us at +1-800-631-0263 to confirm scheduling availability in your area.
Keep Every Clinical CO2 Incubator Survey-Ready
Send us your instrument count and types — we’ll return a quote with turnaround options and a recommended calibration interval that keeps your laboratory inside CAP and CLIA requirements year-round.